Ukraine, 49038, Dnipro, 68 Kniazia Yaroslava Mudroho str.

IOL-10

Supporting epoxy insulator of type ИОЛ(IOL)-10 U2 is designed for the assembly of various electrical and technical equipment (high-voltage switches, switchgears, etc.); serves as a replacement for porcelain insulators. Insulators are manufactured using the technology of epoxy composition casting in a vacuum.

Insulators are manufactured in the U performance category of the placement category 2 in accordance with GOST 15150-69, designed to work under the following conditions:

  • altitude above sea level - not more than 1000 m;
  • relative humidity of air - not more than 98% at 30 ° С;
  • the upper operating value of the ambient air temperature is plus 50 ° C;
  • the lower operating value of ambient air temperature is minus 45 ° С;
  • environment - non-explosive, free of dust, chemically active gases and vapors in concentrations, destroying metal coatings and insulation (atmosphere type II according to GOST 15150-69);
  •  position of insulators in space - any.
Compare

Supporting epoxy insulator of type ИОЛ(IOL)-10 U2 is designed for the assembly of various electrical and technical equipment (high-voltage switches, switchgears, etc.); serves as a replacement for porcelain insulators. Insulators are manufactured using the technology of epoxy composition casting in a vacuum.

Insulators are manufactured in the U performance category of the placement category 2 in accordance with GOST 15150-69, designed to work under the following conditions:

  • altitude above sea level - not more than 1000 m;
  • relative humidity of air - not more than 98% at 30 ° С;
  • the upper operating value of the ambient air temperature is plus 50 ° C;
  • the lower operating value of ambient air temperature is minus 45 ° С;
  • environment - non-explosive, free of dust, chemically active gases and vapors in concentrations, destroying metal coatings and insulation (atmosphere type II according to GOST 15150-69);
  •  position of insulators in space - any.

 

  • Parameter name Parameter value
  • Highest voltage for equipment, Um, [kV] 12
  • Power-frequency test voltage, [kV] 42
  • Mechanical bending strength, [kN] 5; 8
  • Mechanical tensile strength, [kN] 1,8